Fuse Box With LED Indicators and Ground Bus Bar
your classic car, boat, golf cart, buggy, 4-wheeler, RV, camper, travel trailer,
or other vehicle today.
Indicators make finding blown fuses easy.
Especially in the dark!
Fuse Box, Cover, Decals to label the
cover, and 4 mounting screws
a single Positive Cable to the POS “+” input terminal to power the 6 Fused Circuits.
to connect a single Negative Cable to the NEG “–“ input terminal if you would
like to distribute negative (ground) connections to various circuits. It’s like a negative buss-bar integrated
into the fuse panel to make your life easier.
Input Lug – This distributes power to the 6 Fused Outputs
Bus Input – This distributes power to 6 screw terminals to simplify wiring
(super easy to get a ground connection that way).
- 6 Independent
Circuits – 6 Fused Positions
Negative Bus Bar with 6 Outputs (optional
- LED Indicators
– Circuit LED Light Up When Fuse is Blown on a Loaded Circuit
Type: ATO/ATC Style
- Current Rating:
100 AMP Max Per Fuse Block / 30A Max Per Fused Circuit
Rating: 32VDC Max (great for 12V/24V applications)
Temperature: -30C – 85C
- Input Lug
Screw Terminal Size: #10 - Use #10 Ring terminal
Lug Screw Terminal Size: #8 - Use #8 Ring Terminal
- Dimensions: W=87 mm (3.43") / L= 87.5 mm (3.44") / H= 36 mm (1.42")
***Does NOT come with Fuses - sold separately***
NOTES: The LED will NOT light up on a circuit that
is not actually loaded. So, a circuit
that is switched off (open circuit) will not light up if the fuse is blown
until the switch for that load is actually turned on. The
load has to be “trying” to turn on for the LED circuit to “sense” that the fuse
LEDs will NOT light unless you are providing a ground connection to the NEG terminal of the fuse panel (needs this to complete a full circuit for the LED to illuminate). Not required, but if you only use the Fuse Block for POS terminals only you will not be able to utilize the LED indication feature.