6 Way
Fuse Box With LED Indicators and Ground Bus Bar
Rewire
your classic car, boat, golf cart, buggy, 4-wheeler, RV, camper, travel trailer,
or other vehicle today.
LED
Indicators make finding blown fuses easy.
Especially in the dark!
Includes
Fuse Box, Cover, Decals to label the
cover, and 4 mounting screws
Power:
Connect
a single Positive Cable to the POS “+” input terminal to power the 6 Fused Circuits.
Ground:
Option
to connect a single Negative Cable to the NEG “–“ input terminal if you would
like to distribute negative (ground) connections to various circuits. It’s like a negative buss-bar integrated
into the fuse panel to make your life easier.
Inputs:
Single Positive
Input Lug – This distributes power to the 6 Fused Outputs
Single Negative
Bus Input – This distributes power to 6 screw terminals to simplify wiring
(super easy to get a ground connection that way).
Specifications:
- 6 Independent
Circuits – 6 Fused Positions
- Integrated
Negative Bus Bar with 6 Outputs (optional
feature)
- LED Indicators
– Circuit LED Light Up When Fuse is Blown on a Loaded Circuit
- Fuse
Type: ATO/ATC Style
- Current Rating:
100 AMP Max Per Fuse Block / 30A Max Per Fused Circuit
- Voltage
Rating: 32VDC Max (great for 12V/24V applications)
- Rated
Temperature: -30C – 85C
- Input Lug Screw Terminal Size: #8 - Use #8 Ring terminal hole size
- Output Lug Screw Terminal Size: #10 - Use #10 Ring Terminal hole size
- Dimensions: W=87 mm (3.43") / L= 87.5 mm (3.44") / H= 36 mm (1.42")
***Does NOT come with Fuses - sold separately***
NOTES: The LED will NOT light up on a circuit that
is not actually loaded. So, a circuit
that is switched off (open circuit) will not light up if the fuse is blown
until the switch for that load is actually turned on. The
load has to be “trying” to turn on for the LED circuit to “sense” that the fuse
is blown/missing.
LEDs will NOT light unless you are providing a ground connection to the NEG terminal of the fuse panel (needs this to complete a full circuit for the LED to illuminate). Not required, but if you only use the Fuse Block for POS (+) terminals only you will not be able to utilize the LED indication feature.
[ITEMPRICE]